Instructions
INSTRUCTIONS
GUS INSTALLATION
LensHousing
Screws (2)Reector
ReectorNotches.
not supplied
Center Access HoleHousingFig. 1
Reector
Reector Lens
HousingLens
Fig. 2
WARNING: To prevent wiring damage or abrasion, do not
expose wiring to edges of sharp objects.
GUS- 2FT
End Cap (2)
Housing
Lens
Reector
GUS - 4FT
Screw (2)
Snap
Squeeze
Lens
Housing
Notches (4)
Center Access Hole
Knock out for 1/2”
conduit
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.
CAUTION: For proper weatherproof function all gaskets must be seated properly and all screws inserted and tightened
rmly. Apply weatherproof silicone sealant around the edge of the ceiling mounting box and/or junction box. This is
especially important with an uneven ceiling surface. Silicone all plugs and unused conduit entries.