User Manual

7
❏ Center the sensor on the seated or standing position each location of the
table. This should be based on the number of chairs.
❏ Position the sensor roughly ½ way between the front edge and the middle of
the table.
❏ Orient the Sensor so the arrow on the black case is facing the front edge of the
desk.
❏ Wipe the surface free of any oils
❏ Peel off the adhesive backing
❏ Stick the sensor to the location and hold it in place, applying pressure, for at
least 10 seconds.
Furniture Type 4: Banquets/Booths