User Manual

5
❏ Orient the Sensor so the arrow on the black case is facing the front edge of the
desk.
❏ Wipe the surface free of any oils
❏ Peel off the adhesive backing
❏ Stick the sensor to the location and hold in place, applying pressure, for at
least 10 seconds.
Furniture Type 2: Offset Workstation
Install Desk Sensor using the drawings to the right and checklist below as guidelines
for specific placement.
❏ Center the sensor on the seated or standing position on the desk. For offset
seat, center on where the chair most likely will be located.