User Manual

9
❏ Drill a ½” hole in the surface
❏ Insert the SnapToggle or other Threaded Anchor product included with your
shipment
❏ Tighten the Threaded Anchor into place
❏ Gently Twist the Counter into the Anchor
❏ Orient the Sensor to position the white lens closest to the top of the floor plan
and parallel to the space’s walls. Do not over tighten.
❏
Ceiling Type 2: Solid gypsum, metal, wood, etc.
PART TWO
Install the Counter Sensor using the drawings below and checklist below as
guidelines for specific placement.