User Manual

3
Powering On/Off:
Counters have an on/off switch. To power on a Counter, flip the ON/OFF toggle switch
to the ON position. To turn off, flip the switch to the OFF position.
Switch Configurations:
The AI-Confidence threshold can be set by configuring the switches in 4 positions. By
setting the threshold to a specific setting, the object detections created by the
firmware will be limited to the meet the criteria outlined in the diagram above..
FIRMWARE AND FLASHING //
CoWorkr Counters ship pre-flashed with the latest firmware. For updates to the
firmware, the device must be attached to an installer’s computer using a JTAG
connector, wherein the firmware revision can be flashed onto the device. Firmware
updates are not commonly done on production devices.
INSTALLATION //
Install Overview
Similar to WorkPoints Sensors, our Counter Sensors have specific locations in which
they are to be installed. Each device has an ID that must match the location found
on the attached floor plans. Counter Sensors also require a specific position on a