User Manual
2
PURPOSE //
Information on how to use CoWorkr’sCounter Sensor
DEFINITIONS //
Counter Sensor (a.k.a. “WorkSpace Counter”)
CoWorkr “WorkSpace Counters” are battery powered people counters that use an
infrared sensor and AI for counting humans. Counters are ceiling mounted and may
be used in a variety of applications wherein multiple occupants may be present.
Counters may also be wired in positioned at thresholds for in/out counting.
• Counters are “overhead sensors” that require being attached to the ceiling.
• Counters include a specific mechanical attachment that mounts to the
sensor location ceiling type.
• Counters have an on/off switch but all sensors ship to installers with
batteries installed and turned on.
• Counters have a Label with an ID.
DEVICE SETTINGS & CONFIGURATION //
CoWorkr Counters have several configurations that turn the device on/off, as well as
control the data that they transmit. Otherwise, they simply carry out the instructions
provided by the firmware. Above:
Left: Front/Rear diagram of Counter components and switches.
Right: Power Switch close-up