User's Manual

TEX1002LCD
3 / 54
User Manual
Rev. 2.1 - 26/06/19
4. General Description
TEX1002LCD is a compact FM transmitter manufactured by R.V.R. Elettronica
SpA for audio radio broadcasting in the 87.5 to 108 MHz band in 10kHz steps,
featuring adjustable RF output up to 1000 W, respectively, under 50 Ohm standard
load..
The unit is factory aligned and calibrated at the time of manufacture. Because of
this manufacture process, there is no field tune-up or alignment necessary.
Factory tolerances are:
- Maximum Output Rated Power: 60 dBm ±1 dB
- Gain: Not Applicable (the equipment is supplied without a radiant system, that
shall be borne by the customer).
TEX1002LCD is designed to being contained into a 19” rack box of 2HE.
4.1 Unpacking
The package contains:
1 TEX1002LCD
1 User Manual
1 Mains power cables
The following accessories are also available from Your R.V.R. Dealer:
• Options for the machine
• Spare parts
• Cables
4.2 Features
The overall efficiency of TEX1002LCD is better than 70% across the bandwidth,
for this reason are part of RVR Green Line family.
This performance characteristic is guaranteed in a range between +0.25 dB and -3
dB (+5% and -50%) referred to the nominal power of the equipment: for example
from 500W to 1050W in case of TEX1002LCD; outside these limits the equipment
is able to work properly but can not guarantee an efficiency of 70%..
This transmitter incorporate a low-pass filter to keep harmonics below the limits
provided for by international standards (CCIR, FCC or ETSI) and can be connected
directly to the antenna..