User's Manual

TEX1002LCD
49 / 54
User Manual
Rev. 2.1 - 26/06/19
A
B
C
• Remove the driver card and replace it with a new spare part.
• Redo all previously steps, performed in reverse, in order to reassemble and fix
the module in place.
• Replace the cover and tighten all the screws necessary to close it.
8.4.7 How to replace the telemetry card
• Open the top cover of TEX1002LCD by unscrewing all the screws.
• Identify the module to be replaced.
• Unscrew the hexagonal washerA and the two threaded hex spacers B on the
back panel of the TEX1002LCD.
A
B
• Disconnect the connector C.