User's Manual

48 / 54
User Manual
Rev. 2.1 - 26/06/19
TEX1002LCD
A
• Disconnect the connectors B and unscrew the points C.
C
B
• Remove the card and replace it with a new spare part.
• Redo all previously steps, performed in reverse, in order to reassemble and fix
the module in place.
• Replace the cover and tighten all the screws necessary to close it.
8.4.6 How to replace the driver card
• Open the top cover of TEX1002LCD by unscrewing all the screws.
• Identify the module to be replaced.
• Disconnect the connectors A and unscrew the points B and C.