User's Manual

44 / 54
User Manual
Rev. 2.1 - 26/06/19
TEX1002LCD
• Unscrew all screws B on the main board cover box.
B
• Disconnect the connector C and unscrew the RF connector D.
D
C
• Remove the main board and replace it with a new spare part.
• Redo all previously steps, performed in reverse, in order to reassemble and fix
the module in place.
• Replace the cover and tighten all the screws necessary to close it.
8.4.4 How to replace the panel board
• Unscrew the four screws A on the front panel of the TEX1002LCD.
A