User's Manual

TEX1002LCD
43 / 54
User Manual
Rev. 2.1 - 26/06/19
• Disconnect the connectors H and unscrew the points I and J.
H
I
J
• Remove the driver card.
• Remove the RF module and replace it with a new spare part.
• Redo all previously steps, performed in reverse, in order to reassemble and fix
the module in place.
• Replace the cover and tighten all the screws necessary to close it.
8.4.3 How to replace the main board
• Open the top cover of TEX1002LCD by unscrewing all the screws.
• Identify the module to be replaced.
• Unscrew the seven screws A on the rear panel of the TEX1002LCD.
A