User's Manual

40 / 54
User Manual
Rev. 2.1 - 26/06/19
TEX1002LCD
• Disconnect all the connectors at positions G.
G
• Unscrew all the points H with the help of an slotted screwdriver.
H
• Remove the RF module and replace it with a new spare part.
• Redo all previously steps, performed in reverse, in order to reassemble and fix
the module in place.
• Replace the cover and tighten all the screws necessary to close it.
8.4.2 How to replace the RF module
• Open the top cover of TEX1002LCD by unscrewing all the screws.
• Identify the RF module to be replaced.