User's Manual

TEX1002LCD
21 / 54
User Manual
Rev. 2.1 - 26/06/19
1c) To modify power level setting, hold down the ENTER button until opening
the power setup menu.
The edit screen will look like this:
Menu 3
Next to SET indication, a bar provides a graphic display of preset output power.
The filled portion of the bar is proportional to set power level.
Example
100% ouput power
Full bar
≅ 1000W in output
(mod.TEX1002LCD)
25% ouput power 1/4 bar
≅ 250W output
(mod.TEX1002LCD)
The bottom line provides instantaneous power reading (in this example 1000W forfor
TEX1002LCD); press button; press button to increase level, press to decrease it. When
you have achieved the desired level, press ENTER to confirm and exit the default
menu. Please note that the setting is stored automatically; in other words, if you
press ESC or do not press any keys before the preset time times out, the latest
power level set will be retained..
NOTE: This feature prevents the machine from delivering maximum power as
soon as output is enabled from menu 4, or in the event the machine is already
set to ON and energised.
2) Ensure that machine is not in a locked-out state. Press the ESC key to call up
the selection screen (Menu 3). Highlight Fnc and press ENTER to confirm and
access the appropriate menu (menu 4).
In the same menu, ensure that power limiting is disabled: if PWR is set to OFF,
i.e. power output is disabled, move cursor to PWR. Press ENTER and label
will switch to ON, i.e. power output enabled.
Press ESC twice to go back to the default menu (menu 1)..
3) Fine tune power setting from menu 2 (see description of item 1b) until achievingFine tune power setting from menu 2 (see description of item 1b) until achieving
the desired value..
WARNING: Machine is capable of delivering more than rated output power (1000WARNING: Machine is capable of delivering more than rated output power (10001000
W for TEX1002LCD); however, never exceed the specified power rating.; however, never exceed the specified power rating..