User Manual

RSP-APE-030M
User’s Manual
R-tron., Inc. 12/15 page
5.3 How to operate GUI & Functions
Repeater can be controlled in Set-up mode. In Set-up pop-up window, you can input the value and
control DL/UL HPA, AGC, Shutdown and attenuation.
When you are going to check repeater status, click “Synchronize” button which is in the bottom side in
the screen. After setting output value, you can set AGC/ASD level value, using AGC/ASD button.
Figure 5.6 Setup mode