User Manual

NOTCHCELL 20W OPERATING MANUAL
R-tron America, Inc. Page: 48 / 57
► Note : How to check whether wireless modem properly works.
① Click “Modem” which is located in left side menu bar.
② When you see pop-up window like figure 5.17, make communication port
configuration same as GUI setting.
③ Click “START” button.
④ Check every parameters are same as your target value.(You can see more
details at appendix B B1.4)
- Modem Own Number : This is own number of WNMC (Wireless Network
Management Center) and your modem can make a phone call with this
number.
- Cascade Code : This is ID where the repeater is installed.
When the set value should be changed or updated, input new proper system value in
cascade code and click “SET” button. After that, site ID will be newly updated and
update confirmation pop-up message will be displayed.
- Control(Heartbeat Interval) : Controller periodically sends its information to
WNMC. We call it “Heartbeat”. Heartbeat time gap can be set from 3 to 59
minutes.
⑤ Click “Modem” button which is located in left side of modem system window.
⑥ Click “NMST” button.
⑦ Check “Ready” button will be activated as green color which is beside “NMST”
button.
⑧ Check modem status parameters. When displays are same as the followings,
it means that wireless modem setting is OK.
Analog / Digital Digital
Lock Mode -
Service In Service
SMS -
Missed Call -
Svc System PCS + Band Name + Numeric 4 or 5 Digits