User Manual

NOTCHCELL 20W OPERATING MANUAL
R-tron America, Inc. Page: 21 / 57
3.3.4.2 Installing AC power cable
- Connect the CV 5.5㎟ ~ CV 22㎟ x 2C power cable from the accumulative wattmeter
to the AC distribution panel with the Ring Type Terminal Lugs and Flexible Conduits.
- Use the Fork Type Terminal Lugs when connecting the AC power cable.
- No cable will have contact points inside the conduit, and distribution/connection shall
be allowed only in the AC distribution panel.
- Use 22mm flexible conduit when installing the power cable.
- Fix the conduit firmly on the wall or the ground with Saddle.
- Fill up the vacant cable busing holes on the AC distribution panel with silicon.
- Fit the end of the flexible conduits with the conduit caps or by taping.
- All the Flexible Conduits must be sealed tight.
Figure 3.16 Flexible Conduit End Fitting