User Manual

NOTCHCELL 20W OPERATING MANUAL
R-tron America, Inc. Page: 13 / 57
3.3.3 Installing the repeater
The installation methods of the repeater vary depending on the types of support (steel
tower), location, and demand of the carrier. This standard specifies the general
supporting methods and is subject to the types of support.
Figure3.6 Definition of assemblies (ex. electric pole)
3.3.3.1 General
- Check the level of ground when installing the repeater.
- Check if there is enough space for maintenance.
- If required, install branches to secure the safety of the steel tower.
- Fasteners must be melted and zinc plated.
- Use two nuts for a bolt to prevent the connection from becoming loose.
- If the repeater is installed too high, set up the safety scaffold.