User Manual

RSP-APA-002
User’s Manual
R-tron., Inc. 27/34 page
5.3.8 Menu selection window
▶ Alarm history: Shows details of alarms generated from the system
▶ Alarm Mask: Lets you select the alarms you want to use.
▶ ALC: Keeps repeater output at a certain level.
▶ Time Set: Lets you set the time on GUI and on PC.
▶ Reset: Lets you reboot the repeater MCU.
▶ Download: Lets you upgrade MCU when the firmware is upgraded.
▶ Modem: Shows default settings required for communication with wireless
modems, along with other basic settings you need to be aware of.
▶ Exit: Lets you close the GUI program.
▶ Debug: Shows communication status for repeater MCU and GUI.
Figure 5.15 Menu Selection Window
5.3.8.1 Alarm History
This window shows details on alarms stored in the system.
▶ Total Alarm count : Indicates the number of alarms stored in the current MCU. Each count
refers to alarm(s) occurring in the same timeframe. The number can be up to 250.
▶ Listing Alarm index : Lets you set the number of alarms seen on the screen. When you set a
desired number and press the ‘listing’ button, the screen will show related alarms.
▶ Clear : Deletes alarms from the screen. When you press the Clear button, alarms will not be
deleted from the MCU.
▶ Save : Stores the alarm history seen on the screen.
▶ Reset : Deletes all and every alarm from the current screen and the MCU alike.
▶ Exit : Closes the alarm history window.