User Manual

RSP-APA-002
User’s Manual
R-tron., Inc. 25/34 page
5.3.3 Circumstance Condition Control
This function enables you to set the internal temperature of the system and the upper/lower values of
the voltage and current. To change the values, you can enter the desired settings and click the “SET”
button at the upper part of the control window.
In the status mode, you can see current settings for the internal temperature, voltage, and current of
the system.
Figure 5.10 Control Window of Environmental Conditions
5.3.4 Controlling power amplifier and battery
On the “ON/OFF” window, you can control power amplifiers for each path and battery usage. With the
battery set to ‘Off’, the battery alarm will be de-activated as well.
In the “STATUS” window, you can see the current path status (ON/OFF) of the system.
Figure 5.11 Control Window of Power Amplifier and Battery
5.3.5 Controlling input/output
You can set the upper/lower values of the current input/output RF power of the up-/down-links. To
change the values, you can enter the desired settings and click the “SET” button at the upper part of
the control window.
In the status mode, you can see the current input/output settings of the up-/down-links.
Figure 5.12 Controlling Input/output