User Manual

RSP-APA-002
User’s Manual
R-tron., Inc. 24/34 page
5.3.1 Pop-up window for repeater information indication
Figure 5.8 Pop-up window for repeater information indication
▶ System Address : Indicates where the repeater is installed.
▶ System ID : Allocated number from base station. (from 0 to 16383)
For example, when PCS & A band system ID is 0, Service will be indicated as
“PCS B 0”.
▶ RTC Time: Display current time which currently set in MCU.
When repeater time is incorrect, you can change it correctly, using Time Set in the
menu bar.
▶ Repeater Capacitor : Repeater output
▶ Repeater Version : H/W version
▶ S/W Version : Repeater program version
▶ Type : Repeater type
5.3.2 How to set repeater gain
System gain value can be changed using Down/Up link attenuation value control which is in “ATTN”
pop-up window. Available set attenuation value is from 0 to 30 dB, Down/Up Link both.
You can check current system gain in status mode.
Figure 5.9 Gain Setting