User's Manual

69
User’s Manual
4. Operation
Before contacting your service dealer, please make sure you refer to the following
guide. If the Tri MINI does not work normally after completing the following
troubleshooting, please contact your local dealer or service center.
Problem Cause Solution
No LED On Check the power cord for secure connection.
Cannot
communicate
with the
repeater.
Check if the LAN cable is connected to the repeater
and your computer, or your computer to set IP
address. Or please disable and enable the Local
Area Connection.
The mobile
phone is not
working well.
Turn on the power.
or
< a. iDEN >
Check if the DL Amplifier, the UL Amplifier,
iDEN 800 UDC and iDEN 900 UDC in Power
Measurement are displayed ON.
< b. CDMA >
Check if the DL Amplifier and the UL Amplifier of
Parameter Status are displayed ON.
5. Troubleshooting
Tri MINI
Plugged in an
AC outlet
Base
Station
Mobile
Station
Donor antenna
for iDEN
Donor antenna
for CDMA
Service
Antenna
Tri MINI
Plugged in an
AC outlet
Base
Station
Mobile
Station
Donor antenna
for iDEN and CDMA
Service
Antenna
2Way
Divider