User's Manual

42
4. Operation
Maximum Gain 80dB if the DL Input Power <-55dBm.
Result 2
After running Easy Setup or Isolation Measurement, Isolation is displayed with “95”
when the isolation is higher than 95dB, or it is displayed with the actual when the
isolation is lower than 95dB.
•Automatic Level Control: Type under 25 and then click APPLY and ON.
[Example]
For the repeater with 25dBm maximum output power, 80dB maximum gain /
30dB gain control range, → If the signal -45dBm and the ALC is set as 25dBm
the gain will be 70dB to adjust to the output power.
If the input signal is -60dBm, the output power will be 20dBm by the limitation of
the maximum gain even though the ALC is set as 25dBm.