User Manual

System Manual RSN-iDEN-30-DC
R-tron Proprietary & Confidential Page 2
Issue: 1.0
1. Introduction
RSN-iDEN-30-DC Booster is used to fill out uncovered areas in iDEN mobile systems, such as
base station fringe areas, road tunnels, business and industrial buildings, etc.
An RSN-iDEN-30-DC Booster receives signals from a base station, amplifies and retransmits the
signals to mobile stations. Also it receives, amplifies and retransmits signals in the opposite direction.
Both directions are served simultaneously.
To be able to receive and transmit signals in both directions, the Booster is connected to a donor
antenna directed towards the base station and to a service antenna directed towards the area to
be covered.
Control of the Booster is performed using a desktop or notebook loaded through the RJ-45 Jack
which can communicate with the Booster. Remote operation can be performed.
RSN-iDEN-30-DC Booster work as bi-directional amplifiers.
A Booster receives, amplifies, and retransmits signals inbound and outbound simultaneously, i.e.
from the base station via the Booster to the mobile stations and from the mobile stations via the
Ground contact