User's Manual Part 1
15
User’s Manual
3. Hardware Installation
A rod on the left side is intended for a building ground.
Connect the ground cable to the rod.
Note
Enough isolation?
Antenna isolation = Service antenna gain + Path Loss + Donor antenna gain
Antenna isolation
Repeater max. gain +15dB
If antenna isolation < Repeater max. gain +15dB
ĺ
System oscillation or Low gain
Dangerously high voltages may occur and damage the equipment if
the equipment is not grounded properly.
Warning
3.3 Grounding
3.4 RF Cable Connection
Connect a cable from a donor antenna to the DONOR ANTENNA Port.
Connect a cable from a repeater’s service antenna to the SERVICE
ANTENNA Port.
Step 1
Step 2