User's Manual Part 3

iDEN MINI
User’s Manual -29-
3 ALC (Automatic Level Control) Level Setup: 30dBm
* ALC (Automatic Level Control) maintains the specif ic TX and RX output power by the
setup parameter. Do not set the ALC value over 30.
4 ASD* (Automatic Shut Down) Setup:
9 Level: 33dBm, Time: 3sec, Count: 10
5 Tx HPA On
6 Rx HPA On
< Specifying of the operating frequencies, bandwidth, and gains>
> > RHPA ON↵
> > TXALC_LEVEL 30↵
> > TXALC ON↵
> > RXALC_LEVEL 30
↵
> > RXALC ON↵
> > ASD_LEVEL 33↵
> > ASD_TIME 3↵
> > ASD_COUNT 10↵
> > ASD ON↵
* I f the output power gets higher than “ASD_LEVEL”, the repeater will shut
down for “ASD_TIME” time and then turn on the amp and measure the
output power again. If this repeats “ASD_COUNT” times, the repeater will
shut down completely.
> > THPA ON↵