User's Manual Part 3

iDEN MINI
User’s Manual -37-
5. Troubleshooting
5.1 RF Connection Check
Problem
Either the downlink output power or the uplink output power (=Input
Power to the repeater) is too weak.
Solution
Check if the following RF connections are loose:
1. The cable connection from the donor antenna to the donor
antenna port
2. The cable connection from the service antenna port to the
service antenna
5.2 Power Connection
Problem
All LEDs at the bottom are turned off.
Figure 17. LEDs Off
Solution
Check if the power cord is connected correctly and the green LED at the
bottom is on.