User's Manual Part 2

iDEN MINI
User’s Manual -19-
3.2 Mounting
iDEN MINI is easy to mount using the assembled mounting bracket,
which has Ø9 holes for the provided 5/16" fixing screws.
Figure 12. Mounting
Step 1. Remove the cover of double-coated foam tape squares at each corner on
the back side of the template.
Step 2. Stick the provided template to the wall using the tape squares while
adjusting the horizon.
Step 3. Mark with a pen for the holes and drill the marks or drill holes directly on
the mark in the template.
Step 4. Put the screws or bolts into the holes.
Step 5. Mount the iDEN MINI on the right position.
CAUTI ON
Firmly aff ix the equipment on the wall of a building and Check necessary.