User Manual

System Manual RSN-iDEN-25-DC
R-tron Proprietary & Confidential Page 3
Issue: 1.0
which can communicate with the Booster. Remote operation can be performed.
RSN-iDEN-25-DC Booster work as bi-directional amplifiers.
A Booster receives, amplifies, and retransmits signals inbound and outbound simultaneously, i.e.
from the base station via the Booster to the mobile stations and from the mobile stations via the
Booster to the base station.
The Booster can be connected to a donor antenna directed towards the base station, and to a
server antenna directed towards the area to be covered. The donor antenna is connected to the
Booster with type-N connector. On the other hand, the server antenna is an external antenna.
The RSN-iDEN-25-DC Booster are controlled by powerful microprocessors. Operational status
LEDs are visible on the bottom of the Booster.
The Booster works with convection cooling without fan because it has a radiator behind the body
of RSN-iDEN-25-DC.
Operational parameters, such as gain, power levels, alarm condition, Automatic Gain Control
condition, etc. are set using a desktop or notebook and the RJ-45 jack, which communicate, either
locally or remotely via the UTP(Unshielded Twisted Pair Wire) cable, with the Booster.