User Manual

System Manual RSN-iDEN-25-DC
R-tron Proprietary & Confidential Page 2
Issue: 1.0
1. Introduction
RSN-iDEN-25-DC Booster is used to fill out uncovered areas in iDEN mobile systems, such as
base station fringe areas, road tunnels, business and industrial buildings, etc.
An RSN-iDEN-25-DC Booster receives signals from a base station, amplifies and retransmits the
signals to mobile stations. Also it receives, amplifies and retransmits signals in the opposite direction.
Both directions are served simultaneously.
To be able to receive and transmit signals in both directions, the Booster is connected to a donor
antenna directed towards the base station and to a service antenna directed towards the area to
be covered.
Control of the Booster is performed using a desktop or notebook loaded through the RJ-45 Jack
DC Outlet for external device
Remote port
Local port
Alarm LEDs
900MHz DL Output -30dB CPL
Server antenna port
800MHz DL Output
-30dB CPL
Donor antenna port
Modem Ant
AC in and Switch
900MHz UL Output
-30dB CPL
800MHz UL Output
-30dB CPL
Ground contact