Product Info Part 3

30
4. Operation
Click Network in the left menu.
4.5.3 Network
Network Setup
•
Cascade Code: Type in the pre-assigned code. Otherwise, you cannot access
system setup.
•
Location Information: Enter the latitude and longitude of a location, otherwise
you cannot access the system setup. You can input either Decimal Degrees or
Degrees-Minutes-Seconds.
[Example.]
(‘N/S ‘ | ‘E/W ‘) ddd.dddddd: (Latitude: N 39.006957 Longitude: W 94.532306)
•
Heartbeat Interval: Sets the time to transmit the Heartbeat to NMC Server.
(Default value is 20 minutes. At the setup, temporarily reduce the value to 1
minute. After conforming heartbeat report, set the value back to 20 minutes.)
•
Product Information: This is for manufacturer used only. DO NOT change this
value.
•
Static IP for Remote Control: Connect to the External Monitoring Device for
Remote Access. Do not enter any value unless a static IP is assigned. DHCP
client.
•
NMC Server IP: Do not change this value; otherwise, the Heartbeat
transmission or Remote Access may not work.