Product Info Part 3

Problem
Solution
Cause
Before contacting your service dealer, please make sure you refer to the following
guide. If the IDEN MINI does not work normally after completing the following
troubleshooting, please contact your local dealer or service center.
42
5. Troubleshooting
No LED On Check the power cord for secure
connection.
Cannot
communicate
with the
repeater.
Check if the LAN cable is connected
to the repeater and your computer,
or your computer to set IP address.
Or please disable and enable the
Local Area Connection.
The mobile
phone is not
working well.
Turn on the power.
or
Check if the DL Amplifier and the
UL Amplifier of Parameter Status
are displayed ON.
Repeater
Donor
Antenna
Plugged in an
AC outlet
Donor
Base Station
Server
Mobile Statio
n
Server
Antenna
Not working well
Turn off the repeater.
Measure the isolation and verify
if the isolation between the donor
antenna and the server antenna is
enough for the repeater. Refer to the
note on page 15.
Oscillation
1. The values above are changed
randomly under operating of DL
ALC, UL ALC, and ASD.
2. DL Amplifier and UL Amplifier
are on and off iteratively.