User's Manual Part 3

iDEN MINI
User’s Manual -27-
3 ALC (Automatic Level Control) Level Setup: 18dBm
4 ASD* (Automatic Shut Down) Setup:
9 Level: 30dBm, Time: 3sec, Count: 10
5 Tx HPA On
6 Rx HPA On
Command: > > RHPA ON
↵
Command: > > TXALC_LEVEL 18
↵
> > TXALC ON↵
Command: > > RXALC_LEVEL 18↵
> > RXALC ON↵
Command: > > ASD_LEVEL 30
↵
> > ASD_TIME 3↵
> > ASD_COUNT 10↵
> > ASD ON↵
* I f the output power gets higher than “Level”, the repeater will shut down for
“Delay” time and then turn on the amp and measure the output power again.
If this repeats “Count” times, the repeater will shut down completely.
Command: > > THPA ON
↵