User Manual

CDMA MINI
User’s Manual -30-
6. Troubleshooting
6.1 RF Connection check
<Problem>
Either the downlink output power or the uplink output power (=Input Power to the repeater)
is too weak.
<Solution>
Check if the following RF connections are loose:
1. The cable connection from the donor antenna to the donor antenna port
2. The cable connection from the service antenna port to the service antenna
6.2 Power Connection
<Problem>
All LED’s at the bottom are turned off.
<Solution>
Check if the power cord is connected correctly and the green LED at the bottom turns on.
6.3 Red Light on the Alarm LED
<Problem>
Red light LED turns on the Alarm LED after applying AC power.
<Solution>
Request a technical support.