User's Manual

52
② Power Control
CLC(Cable Loss Compensation): If CLC On, measure the UTP cable loss connecting MHU and
EHU. Set up the Gain by compensating Cable Loss.
Manual Gain Control: Gain setting is impossible if CLC On.
If CLC Off, gain setting is available.
③ System Control
Return to Factory Default: EHU Unit Initialize
EHU ID: ID of EHU Unit is able to set up and input 1 to 8.(ID of EHU has to be same as
accessing Port Number of MHU)
Cascade Code: Cascade Code of EHU Unit is able to set up.
Serial Number: Serial Number of EHU Unit is able to set up.
④ Alarm Status: Alarm occurred if it is out of normal range.
• If checking the MHU on EHU Page, connect to iDEN Page of MHU.
EHU Link Status
If checking Link On/Off Box, the status is Port Link On. If not, the status is Off.
If RU is connected with Port Link On, it displays “RU
” and turn green light on.
If Port Link On but connection is not available, it displays RU but turn red light on.
If Port Link Off, If doesn’t display anything and turn light off at Link status.
C. RU