User's Manual

• Access Web GUI on IP Mode Static (Remote Port connection)

- Local IP Setting

Step 1 Repeat Step 1 through 4 on page

Step 2 Check Use the following IP address and enter the manual IP configuration. And then,

click OK.

Step 3 Open your Web browser and type “http://192.168.0.1” into the URL address box.

Then press the Enter key.

- URL address for the remote access

Open your Web browser and type the manual IP address into the URL address box. Then press

the Enter key.

[Example]

Web GUI access URL is http://192.168.0.18