User's Manual Part 3

iDEN Add-On Filter Box
User’s Manual -22-
4. Troubleshooting
4.1 RF Connection Check
Problem
Filtered Output Power (=Input Power to the repeater) is too weak.
Solution
Check if the following RF connections are loose:
1. The cable connection from the donor antenna port to Input port
2. The cable connection from the Filtered output to the repeater
4.2 Power Connection
Problem
All LEDs at the bottom are turned off.
Figure 17. LEDs Off
Solution
Check if the power cord is connected correctly and the green LED at the
bottom turns on.