User's Manual

∙ Alarm : If an alarm occurs, the alarm LED on the repeater will turn on. Please refer
tothe troubleshooting section of this manual.
∙ It is recommended to NOT change any of the values in the alarm range.
Solution4.
ALC
∙ Automatic Level Control: Type under 30 and then click APPLY and ON.
[Example at the 700M BAND]
For a repeater with 30dBm maximum output power, 87dB maximum gain/
30dB gain Control range, Æ If the signal -57dBm and the ALC is set as
23dBm, the gain will be 80dB to adjust to the output power.
If the input signal is -50dBm, the output power will be 30dBm by the
Limitation of the maximum gain even though the ALC is set as 30dBm
Solution5. ASD