User's Manual

RV-QUADCOMM USER’S MANUAL V1.0.00 Tech Support: 1-888-317-8766
6
2.2 Key Features
◈ Flexible band configuration
- Hot Swappable modular units
- Can service up to 100k square feet
◈ Powerful Features
- ICS on board (Interference cancellation Function)
- Isolation and Oscillation Check
- Auto Gain Control
- Auto Shutdown
- built in Spectrum Analyzer
◈ Composition (Main Unit and Four RF Cards by service band)
- Quadcomm-700N (700M band) for LTE Service
- Quadcomm-800 (Cellular band) for EVDO/CDMA2000 Service (LTE capable via firmware update)
- Quadcomm-1900 (PCS band) for EVDO/CDMA2000 Service
- Quadcomm-2100 (AWS band) for EVDO/CDMA2000 Service (LTE capable via firmware upgrade)
- Main Unit provides for multiple repeater modules (up to four) using a single antenna port and/or
multiple antenna ports.
◈ Design (Each RF Card is channel selectable)
- Provides capability to select almost any channel combination within a service band via digital signal
processing.
- Digital signal processing allows for High quality, out of band rejection and high performance
◈ User friendly Web GUI control and monitor.
- Remote monitoring and control through the Web GUI Interface
- Reports the status of connection as a function of SNMP regularly and reports an alarm if the event
occurred.