User's Manual

RV-QUADCOMM USER’S MANUAL V1.0.00 Tech Support: 1-888-317-8766
4
1.4 Glossary
The following is a list of abbreviations and terms used in this manual.
Abbreviation Definition
AC Alternating Current
ANT Antenna
ATT Attenuator / Attenuation
CDMA Code Division Multiple Access
DC Direct Current
DL Downlink
HPA High Power Amplifier
GUI Graphic User Interface
LED Light Emitting Diode
MCU Main Control Uint
PLL Phase-locked loop
PSU Power Supply Unit
RF Radio Frequency
RSSI Received Signal Strength Indication
SNMP Simple Network Management Protocol
TEMP Temperature
UL Uplink
VSWR Voltage Standing Wave Ratio
AGC (Automatic Gain Control)
AGC prevents the repeater from exceeding its maximum output power by reducing the gain automatically.
AGC is used to adjust the gain to an appropriate level for a range of input signal levels.
ASD (Automatic Shutdown)
ASD protects the repeater from oscillation or excessive input signal and eliminates any degradation to the
network.
ICS (Interference Cancellation System)
ICS is an improvement solution for wireless network service quality. Unlike a normal RF repeater, ICS cancels
interference brought on by oscillation and other issues, greatly improving performance.