User's Manual

RV-QUADCOMM USER’S MANUAL V1.0.00 Tech Support: 1-888-317-8766
27
4.C. Easy Max Setup
You can configure the system automatically without manual operation.
Step 1. Easy Max Setup function will automatically run with one click of Execute button.
Step 2. With Execute button clicked, Output Power will be set by AGC level automatically.
Easy Max Setup will end with UL and DL Path, ICS Mode, AGC Mode and ASD Mode turned On.
Result 1 DL and UL gain are fixed and the output power depends on the input power
Result 2 Maximum DL Output Power 30dBm
If the DL Input Power >= -57dBm and the isolation value is ≥max gain+15dB