User's Manual

RV-QUADCOMM USER’S MANUAL V1.0.00 Tech Support: 1-888-317-8766

4.B. Manual Gain Setting

When you want to set gain value not using Auto Gain control refer to the following;

Step 1. For manual gain control AGC must be turned off

(700M, 1900M, 2100M : 30dBm / 800M : 25dBm)

Step 2. The user can select any gain value as long as it does not over-drive the amplifier or exceed isolation

requirements. Gain is automatically limited where conditions do not permit high gain. Select the DL

and UL Gain values. Turn on the DL and UL path controls

Result 1 DL and UL gain are fixed and the output power depends on the input power

Result 2 Maximum DL Output Power 30dBm

If the DL Input Power >= -57dBm and the isolation value is ≥max gain+15dB