User's Manual

RV-QUADCOMM USER’S MANUAL V1.0.00 Tech Support: 1-888-317-8766

4. Cable Installation

4.1. Cable Connection

Step 1 : Connect a cable from the donor antenna to the Donor Antenna Port.

Step 2 : Connect a cable from a repeater’s service antenna to the Server Antenna Port.

4.2. Interconnection Cabling

Step 1 : Tighten RF cables to SMA connector

with a thin 8mm wrench.

① Connect short RF cable to server side

② Connect long RF cable to donor side

Step 2 : Tighten the other side to N-type

connector with a 20mm wrench.

③ Short RF cable to server side

④ Long RF cable to donor side

Step 3 : Connect the data cable ⑤.