User's Manual


#2':75'4/#07#.86GEJ5WRRQTV

 GUI Status
The status page display system, control, and alarm information.
When you set any value on the Control page the change will be reflected on Status page.
<Status>
 System
G Firmware version and location are displayed under Repeater Information.
G The current band setting, set from the control page, is shown in bold font.
 Operating
G DL Path Monitor displays input from the donor antenna circuit, output power at repeater server
antenna port, and downlink amplifier gain.
G UL Path Monitor displays input from the server antenna circuit, output powr at repeater donor
port, and uplink amplifier gain.
G Isolation Status shows isolation value (dB) between the donor antenna and server antennas.
G Available gain allowed by isolation measurement. Available gain is derived from the antenna
isolation value plus 15dB. Full system gain (85dB) is available if the antenna isolation value is
at least 100dB.