User's Manual

APEX730 USER MANUAL V1.0.00 Tech Support: 1-888-317-8766
24
4.6.2 Manual Gain Setting
4.6.2.1 AGC mode On Setting
Step 1. Repeat Step 1 through Step 2
Step 2. Isolation Check
The Isolation will calculate the Available Maximum Gain which defines the maximum gain
to be setup.
Click Isolation
Step 3. AGC must be turned on. AGC automatically assigns gain in accordance with AGC level.
Use AGC level to increase or decrease gain.
(Gain Offset is a gain differential between DL Output gain and UL output gain.)
Ex>AGC Level 30dBm, Gain Offset -3dB → DL Gain 90dB, UL Gain 87dB
AGC Level 25dBm, Gain Offset 0dB → DL Gain 85dB, UL Gain 85dB