User's Manual

APEX730 USER MANUAL V1.0.00 Tech Support: 1-888-317-8766
21
evenually shutdown the amplifier permanently and trigger the external shutdown lamp.
- ASD Level is set to 33dBm by default. It is not necessary to change the default level.
4.5.3 Alarm Control
• Alarm response time may be set between 1 and 5 minutes.
• Alam Mask allows the user to customize the type of alarms sent to the SNMP server when
remote monitoring is in use.
4.5.4 Band Select
• Band select sets the digital filter to the center frequency and bandwidth of the local
service for which the repeater is intended to amplify. Likewise, all other signals outside of
the selected Center Frequency and Bandwidth are rejected.
• The user can select one, two three distinct sections within the LTE band. Each of the 1st,
2nd and 3rd filter blocks can be set to 4.52MHz or 9.02MHz of Bandwidth. Only the
downlink center frequency is set by the user. The uplink center frequency are automatically
set in acordance with the downlink frequencies.