User's Manual

APEX730 USER MANUAL V1.0.00 Tech Support: 1-888-317-8766

• Ethernet IP Mode / IP Address: Enables you to set a connection mode for the

network connected to the APEX730 remote LAN port. When you “select” Auto, the

device automatically assigns the IP address. When you select “Static”, it is possible to

set an IP address of your choosing.

• SNMP: In order to send Heartbeat and alarm related information to a remote

monitoring server, you can set a server IP address. The factory default IP address is

10.22.25.15.

• Heartbeat Interval: Sets the time to transmit the Heartbeat to the NMC Server.

(Default value is 20 minutes.)

4.5 GUI System Control