User's Manual

APEX1933 USER MANUAL V1.2 Tech Support: 1-888-317-8766

• Location Information: Enter the latitude and longitude. You can input values either in

Decimal Degrees or Degrees-Minutes-Seconds.

[Example]

(‘N/S’ | ‘E/W’) ddd.dddddd: (Latitude: N 39.006967 Longitude: W 94.532306)

• Refresh Time: Set each refresh time for connecting to Local port and Remote port.

5.4.2.2 ETHERNET SETTING

• Ethernet IP Mode/IP Address: Enables you to set a connection mode for the network

connected to the APEX19xx remote LAN port. When you “select” Auto, the device

automatically assigns the IP address. When you select “Static”, it is possible to set an

IP address of your choosing.

• SNMP: In order to send Heartbeat and alarm related information to a remote

monitoring server, you can set a server IP address. The factory default IP address is

10.22.25.15.

• Heartbeat Interval: Sets the time to transmit the Heartbeat to the NMC Server.

(Default value is 20 minutes.)

5.4.3 User Note