User's Manual

APEX 1900-24 USER MANUAL V1.0.00 Tech Support: 1-888-317-8766
26
• Cascade Code: Type the pre-assigned cascade code. Otherwise, you cannot access the
system setup.
• Location Information: Enter the latitude and longitude. You can input values either in
Decimal Degrees or Degrees-Minutes-Seconds.
[Example]
(‘N/S’ | ‘E/W’) ddd.dddddd: (Latitude: N 39.006967 Longitude: W 94.532306)
• Product Information: This is for manufacturer use only. Do not change this value.
¾ ETHERNET SETTING
• IP Mode/IP Address: Enables you to set a connection mode for the network
connected to the CAT5DAS-RU port. When you “select” Auto, the device automatically
assigns the IP address. When you select “Static”, it is possible to set an IP address of
your choosing.
• SNMP: In order to send Heartbeat and alarm related information to a remote
monitoring server, you can set a server IP address. The factory default IP address is
10.22.25.15.
• Heartbeat Interval: Sets the time to transmit the Heartbeat to the NMC Server.
(Default value is 20 minutes.)
③ User Note
<Network User Note set-up>