Specifications

4
Introduction
The R-Tech Tig160PDC is a member of our field acclaimed family of welding products.
Premium features include:-
1. Inverter power source – more efficient to operate, provides smoother weld characteristics.
2. Pulse welding in DC Tig welding mode
3. HF Arc start – Easy arc striking and prolonged tungsten life
4. Slope up / slope down
5. Digital amp meter
6. Industrial 35% Duty cycle at 160 Amps @ 40C
Recommended Processes
The R-Tech Tig160PDC is recommended for the Tig welding processes within its output capacity of
160 Amps
Equipment Limitations
The R-Tech Tig160PDC is protected from overloads beyond the output ratings and duty cycle as
per machine specifications with thermostat protection of the output coils and rectifiers.
Welding Capability – Duty Cycle
The R-Tech Tig160PDC is rated at 160 Amps at 35% duty cycle on a ten minute basis. If the duty
cycle is exceeded a thermal protector will shut machine off until the machine cools.
Technical Specifications
Model No.
R-Tech TIG160PDC
Input
240V AC 50/60Hz
Fuse Slow-blow 13Amp
MMA
No-load Voltage
60V – 80V
Current Range
5A – 125A
Rated Output Current
125A
Duty Cycle
35%
DC TIG
No-load Voltage
60V – 80V
Current Range
5A – 160A
Rated Output Current
160A
Duty Cycle
35%
Up-Slope Time
5 Seconds
Down-Slope Time
5 Seconds
Pulse Frequency Range
0.5Hz – 25Hz
Gas Post Flow Time
1 – 10 Seconds
Arc Starting Mode
High Frequency
Gross Weight
12 KG
Insulation
IP21S
Dimensions mm
425 x 195 x 310