Technical data

IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved. Before each use of the product, please inspect for any rips, damages, tears, etc.
8200
8210
8210
Plus
9210
8511
8110S (N95)
Is designed for people with smaller
faces. It helps provide worker protection
against certain non-oil based particles.
It is comfortable and easy to use which helps promote greater
worker acceptance and increased wear time.
9010 (N95)
Designed to help provide quality, reliable
worker protection against certain non-
oil based particles in a convenient, flat
fold design. Each respirator is individually packaged to offer
convenient storage and portability. Two strap design with
a conformable nose clip and Advanced Electret Media help
make breathing easier and cooler.
Individually packaged
Unvalved N95 Respirators
9210
(
N95
)
(AAD#37021)
A breakthrough in comfort and convenience.
This three-panel respirator with innovative
design helps provide comfortable, reliable
worker protection against non-oil based particles.
Individually packaged
8210Plus
(
N95
)
(AAD#07048)
Builds on all of the features that have
made the 8210 one of the most widely
used N95s in industry. The PLUS offers
comfortable braided headbands and staple free attachment.
8200 (N95) (AAD#07023)
Designed to help provide reliable
protection against certain non-oil based
particles. Low priced N95 that features
Advanced Electret Media, adjustable noseclip and nose foam
to help provide a custom fit and secure seal.
8210 (N95)
Features Advanced Electret Media
(AEM), welded strap attachment, soft
nose foam and adjustable noseclip to
help provide a custom fit and secure seal.
3M
™
Filtering Facepiece
Respirators – Comfort
Suggested Applications: Sweeping, sanding,
grinding, sawing, bagging in a non-oil environment
Important
All 3M
™
Filtering Facepieces are NIOSH approved respirators.
Before using, you must determine the following:
1. The types of contaminants for which the respirator is being
selected and exposure time.
2. The concentration level of the contaminant(s). Do not use for
particle concentrations that exceed 10 times the OSHA PEL or
applicable occupational exposure limit, whichever is lower.
3. Whether the respirator can be properly fitted to the wearer’s face.
Do not use with beards, or other conditions that prevent a good seal
between the face and the sealing surface of the respirator.
4. Before required use of filtering facepiece respirators, a written
respiratory protection program must be implemented, meeting
all the requirements of OSHA 29 CFR 1910.134 including medical
evaluation, training, and fit testing.
3M Automotive Aftermarket Division (AAD) Product Numbers
are found in parentheses on select products.
Flags denote country of manufacture, however all products may include globally
sourced components. Contact 3M for more details.